Product ID:SCOTCH WELD(TM)1838 B/A,TAN EPOXY ADH,PT-A
MSDS Date:07/14/1989
FSC:8040
NIIN:00-823-7944
Kit Part:Y
MSDS Number: BHFZV

3M

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

POLYAMID RESIN

CAS: 68410-23-1

Fraction By Weight: 70-80%

TRIETHYLENETETRAMINE

CAS: 112-23-3

Fraction By Weight: 5-15%

CLAY

CAS: 68953-58-2

Fraction By Weight: 1-10%

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-10%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:THE EPOXY RESIN IN THIS PRODUCT IS A
SKIN SENSITIZER, ESPECIALLY FOR CERTAIN SUSCEPTIBLE INDIVIDUALS
Effects of Overexposure:EYE: IRRITATING UPON DIRECT CONTACT.
SKIN: IRRITATING ON
PROLONGED/REPEATED CONTACT. INHAL:
IRRITATING TO NOSE AND THROAT.ING ST: ORAL TOXICITY IS NEGLIGIBLE

First Aid:EYE: IMMEDIATELY FLUSH W/PLENTY OF WTR FOR 10 MINUTES, CALL A
PHYSICIAN SKIN: WASH THOROUGHLY WITH SOAP AND WATER
INHAL: REMOVE PERSON TO FRESH AIR.
CALL A PHYSICIANINGST: DO NOT INDUCE VOMITING. IMMEDIATELY CALL A
PHYSICIAN

Flash Point:NA
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SCBA WHEN FIGHTING
FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:COLLECT SPILLED MATERIALS. TRANSPORT IN
APPROVED METAL CONTAINER, AND SEAL. VENTILATE AREA.

Handling and Storage Precautions:AVOID CONTACT OF EYES/SKIN.
KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WHEN CUTTING, GRINDING OR SANDING CURED
MATERIAL.

Ventilation:SUFFICIENT VENTILATION
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES/CHEM GOGGLES OR DUST MASK
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
KEEP OUT OF THE REACH OF CHILDREN.
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:.95
Evaporation Rate & Reference:NA
Solubility in Water:NIL
Appearance and Odor:AMBER, PASTE, AMINE ODOR

Stability Indicator/Materials to Avoid:YES
NA
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR BURNING MAY
PRODUCE CO, CO2 & NITROGEN DECOMPOSITION PRODUCTS INCLUDING HCN

Waste Disposal Methods:COMPLETELY CURE & DISPOSE OF FULLY CURED WASTE
PRODUCT IN A SANITARY LANDFILL. INCINERATE UNCUREDBULK PRODUCT
AFTER MIXING W/FLAMMABLE MATL IN AN INDUSTRIAL OR COMMERCIAL
FACILTY. DISPOSAL SHOULD BE IN ACCORDANCE W/APPLICABLE
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.